中华设计论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

快捷导航
二级导航
查看: 184|回复: 1

[分享] 手机天线设计

[复制链接]
发表于 2015-11-15 20:01:25 | 显示全部楼层 |阅读模式
手机天线设计
Antena  General Design Guidelines
1. Keep antenna away from moveable Camera and Flexible PCB.
2. Keep battery and battery metal cage a minimum of 5mm away from antenna space or antenna element.
3. Use inductors on speaker wires if speaker is inside antenna space.
4. Keep counter balance vibrators away from antenna.
5. Keep antenna volume sensible.
6. Keep antenna contact pad size to a minimum
7. No ground on any layers below the contact pad neither inside nor on
the opposite side of the PCB.
8. No ground on layers inside the PCB below matching circuit.
9. Antenna contact clip length to be at minimum
10. Distance between antenna contact and shielding cans etc. to be
minimum 2 to 4mm (parasitic effect)
11. RF switch and amplifier or duplexer to be as close as possible to the matching circuit are a General Design Guidelines
12. No conductive paint (EMI shield)around antenna area or close to its
contact
13. Minimize length of Flex circuit that connects the upper folder on clam shell phones
14. Flex circuit connection to flip should be covered with ground layer on
both sides which connects well to main ground.
发表于 2015-11-30 16:03:52 | 显示全部楼层
啊啊啊啊啊啊啊
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|手机版|Archiver|中华设计论坛 ( 苏ICP备19001005号-1

GMT+8, 2019-5-27 17:05

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表